Patagonia Waterproof Jacket Galvanized
This product is not available
true
Not available
Suggested alternatives
In a nutshell
Waterproof
No rain’s getting through this! The water column shows how waterproof the fabric is: the higher the number, the higher the waterproofing.
Windproof
Not even a breath of wind gets through here. In other words, you never feel the cold wind through the fabric.
Breathable
This means that your sweat can escape, instead of being trapped. So you never feel clammy.
Ventilation zips
These allow your body heat to escape during intense activities. Extra ventilation = less sweating!All about this product
Size advice
Size advice
Size advice
The height of the model is | 180 cm |
The model is wearing size | S |
Material & care instructions
Material & care instructions
Material & maintenance
Fabric composition | 88% PES (100% recycled), 12% EL |
Stretch | Yes |
Product details
Product details
Measurements
Weight (g) | 439 |
Weatherproof
Waterproof | Yes |
Water column (mm) | 20000 |
Windproof | Yes |
Breathable | Yes |
Technical features
Clothing Technology | H2No |
Garment features
Hood | Yes |
Adjustable hood | Yes |
Detachable hood | No |
Sleeve closure | Velcro |
Armpit zip | Yes |
Other features
Gender | Women |
Product Code | 3155D90002 |
Description
Description
General
A balance of weight, durability and protection, our newly revised waterproof/breathable Galvanized Jacket delivers in the alpine, with a supple, robust, 3-layer H2No™ fabric with DWR (durable water repellent) finish. We’ve extended our recycled offerings to even our most technical pieces, and the Galvanized’s shell fabric is now 88% polyester (recycled) and 12% spandex. The soft, jersey-knit backer on the inside wicks moisture and maintains an amazing level of comfort. Pit zips enhance venting, and an engineered pattern eliminates all seaming across the shoulders and back, resulting in zero abrasion points and unprecedented stretch.
The Optimal Visibility Hood works with any helmet or without, and adjusts with a single-pull Cohaesive™ embedded cord-lock system. Handwarmer pockets ride above harness line and close with watertight zippers, as does the exterior chest pocket. Minimal hook-and-loop closures secure the cuffs, which are lined with polyurethane to maintain a snug seal. Hem cord locks adjust easily with one hand, and the center-front zip has an interior storm flap and non-chafing zipper garage. With a concealed RECCO reflector.
The Optimal Visibility Hood works with any helmet or without, and adjusts with a single-pull Cohaesive™ embedded cord-lock system. Handwarmer pockets ride above harness line and close with watertight zippers, as does the exterior chest pocket. Minimal hook-and-loop closures secure the cuffs, which are lined with polyurethane to maintain a snug seal. Hem cord locks adjust easily with one hand, and the center-front zip has an interior storm flap and non-chafing zipper garage. With a concealed RECCO reflector.
Technical details
- Engineered pattern eliminates all seaming across the shoulders and back, for zero abrasion points and full stretch
- Optimal Visibility Hood adjusts with single-pull Cohaesive™ embedded cord-lock system to work equally well with any type of helmet or a bare head
- Two high handwarmer pockets with watertight zippers stay clear of a harness or pack waistbelt; one welted exterior left-chest pocket with watertight zipper
- Cohaesive™ embedded cord-lock system at hem offers intuitive one-handed operation; cuffs have minimal self-fabric hook-and-loop closure and textured polyurethane facing that grips gloves when secured, keeping sleeves in place when you’re swinging a tool
- Concealed RECCO reflector
Reviews (0)
Reviews
User Reviews (0)
Share your thoughts
Maintenance
Maintenance
Washing waterproof garments
Always review the jacket labels before washing for specific washing instructions. We recommend that you wash your waterproof jacket with a technical detergent on a regular basis. This prevents damage to the waterproof layer. Rise it out well so that there are no soap residues. Never use fabric softener.
Impregnating waterproof garments
When you impregnate your jacket, it is a good idea to put it in the dryer after washing it. This reactivates the water repellent layer on the outside. After several washes, the outside of your garment will absorb moisture. The jacket will become heavy and feel cold and clammy. When that happens, it is time to impregnate the jacket. Use a product made for the washing machine or choose a spray.
Recommended products
Sustainability Features
Sustainability Features
Certificates
This product as a whole or the individual materials within this product have the following certification(s). These are voluntary guidelines used to demonstrate their commitment to good environmental, social, ethical, and food safety practices.
1% for the planet |
Cookie settings for the best A.S.Adventure online experience
To guarantee you the best online experience, A.S.Adventure uses marketing, analytical, and functional cookies (and similar technologies). For more detailed information, please refer to our cookie policy. Sometimes third parties place tracking cookies on our site to show you personalised adverts outside of the A.S.Adventure website. Additionally, tracking cookies are placed by social media networks. By selecting "accept cookies" you agree to this. In order not to have to ask you more than once, we store your preferences for the use of cookies on the website for a period of two years. You can edit your preferences at any time through the cookie policy at the bottom of every page on the website.